Go Back   Land Rover Forum > Land Rover Tech > Tech Info
Register Garage All Albums FAQ Community Calendar Today's Posts Search

Tech Info Discuss general tech info here, from tech write ups and how-to's.


Reply
 
Thread Tools Display Modes
Old 06-11-2014, 02:51 PM   #1
dai27/7
Junior Member
 
Join Date: Jun 2014
Age: 62
Posts: 1
Default non starter

I have a 2001 TD5 which i love and cannot imagine beign without it. This last week I have had a spot of bother, I put the key in the Ingnition and she starts from cold, I drive her about for 2 hrs,then stop for about 2 hrs then she starts up again go about 10 miles from my home switch off try to restart from hot nothing. All the lights on the dash do come on.
1 I do not think its the immobilisor. if it were this, surely the alarm would sound if switch was opreated. As the doors activate and disengage on the key remote.
2 The starter does not turn at all when i turn the switch no clicking of the solenoid.
3 Could it be an earth problem, also my thaughts are could it be a dodgey relay getting to warm, or the switch barrel itself.
4 Have not tried this yet but will check if i get a 12v supply to the starter once the switch it turned this would prove, either it is a starter problem or a relay problem.
Does anyone have any ideas please thanks
dai
dai27/7 is offline   Reply With Quote
Old 06-12-2014, 07:53 AM   #2
Joey
Senior Member
 
Join Date: Mar 2011
Location: Liberty Twp, OH
Posts: 225
Garage
Default

When a vehicle does not crank when hot, I start with the battery first, then the starter? Test both.
__________________
This forum is not used much... please go to:

http://www.landroverworld.org


Joey
Cincinnati OH
http://www.customroveraccessories.com Home of the New D2 horn buttons!

http://www.usarovers.com/ (call for Rover parts ask for Nathan 502-222-5859)

Rover Radio issues or IPOD Adapters http://home.valornet.com/splacket/index.htm

EAS fault http://www.rswsolutions.com

When working with GEMS vehicles. Never try to locate a misfire by pulling plug leads off - pull the injector connector instead. Otherwise you can blow up the ECU.

Secondly never swap ECUs between vehicles to test them, because both vehicles and ECUs may stop working, and you'll have to have them all reset by a franchised LR dealer (ouch!).
Joey is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:33 AM.


Sponsor Ads

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

Garage vBulletin Plugins by Drive Thru Online, Inc.