Go Back   Land Rover Forum > Land Rover Specific Models > Discovery II
Register Garage All Albums FAQ Community Calendar Today's Posts Search

Discovery II Discuss here about the second version of Land Rover's Discovery (Disco II) in this section.


Reply
 
Thread Tools Display Modes
Old 07-19-2014, 12:20 PM   #1
hawken89
Junior Member
 
Join Date: Jul 2014
Posts: 3
Default HVAC Blower Motor Resistor

Hi there. I am a novice so take it easy on me guys!

I have a 2001 Land Rover Disco 2 w no AC or heat. Initially the first three speeds went out now everything is out. After much poking around I am fairly certain I can get the first 3 speeds going by replacing the blower motor resistor. When I look up the part I see the top resistor. But when I pulled mine out it was the bottom resistor. I can't find the bottom one and as you can see it is much more expensive than the top one. Are these parts interchangeable??

Thanks all!
Attached Images
File Type: jpg parts.jpg (57.2 KB, 1 views)
hawken89 is offline   Reply With Quote
Old 07-21-2014, 07:01 AM   #2
Joey
Senior Member
 
Join Date: Mar 2011
Location: Liberty Twp, OH
Posts: 225
Garage
Default

are you sure it is a resistor issue... check for power going to the motor at all... sadly the fuse box near the battery under the hood can corrode and one of the first things to go is the blower motor.
__________________
This forum is not used much... please go to:

http://www.landroverworld.org


Joey
Cincinnati OH
http://www.customroveraccessories.com Home of the New D2 horn buttons!

http://www.usarovers.com/ (call for Rover parts ask for Nathan 502-222-5859)

Rover Radio issues or IPOD Adapters http://home.valornet.com/splacket/index.htm

EAS fault http://www.rswsolutions.com

When working with GEMS vehicles. Never try to locate a misfire by pulling plug leads off - pull the injector connector instead. Otherwise you can blow up the ECU.

Secondly never swap ECUs between vehicles to test them, because both vehicles and ECUs may stop working, and you'll have to have them all reset by a franchised LR dealer (ouch!).
Joey is offline   Reply With Quote
Old 07-21-2014, 11:06 AM   #3
hawken89
Junior Member
 
Join Date: Jul 2014
Posts: 3
Default

I will check.
The first 3 speeds went but the high speed was still working up until a couple of weeks ago.
I thought to change the resistor bc the high speed AC is too loud anyways.
at least get 3 speeds going. but maybe the whole show is a bust at this point?
hawken89 is offline   Reply With Quote
Old 07-21-2014, 11:30 AM   #4
Joey
Senior Member
 
Join Date: Mar 2011
Location: Liberty Twp, OH
Posts: 225
Garage
Default

if the fan is loud then the bird cage may be full of leaves.
__________________
This forum is not used much... please go to:

http://www.landroverworld.org


Joey
Cincinnati OH
http://www.customroveraccessories.com Home of the New D2 horn buttons!

http://www.usarovers.com/ (call for Rover parts ask for Nathan 502-222-5859)

Rover Radio issues or IPOD Adapters http://home.valornet.com/splacket/index.htm

EAS fault http://www.rswsolutions.com

When working with GEMS vehicles. Never try to locate a misfire by pulling plug leads off - pull the injector connector instead. Otherwise you can blow up the ECU.

Secondly never swap ECUs between vehicles to test them, because both vehicles and ECUs may stop working, and you'll have to have them all reset by a franchised LR dealer (ouch!).
Joey is offline   Reply With Quote
Old 07-21-2014, 12:26 PM   #5
hawken89
Junior Member
 
Join Date: Jul 2014
Posts: 3
Default

lol what is a bird cage??
hawken89 is offline   Reply With Quote
Old 07-21-2014, 01:24 PM   #6
Joey
Senior Member
 
Join Date: Mar 2011
Location: Liberty Twp, OH
Posts: 225
Garage
Default

it is the fan and the space it occupies.. basically you take the blower apart and you will see the fan and all the leaves that are in there. It happens to all rovers and most cars over time.
__________________
This forum is not used much... please go to:

http://www.landroverworld.org


Joey
Cincinnati OH
http://www.customroveraccessories.com Home of the New D2 horn buttons!

http://www.usarovers.com/ (call for Rover parts ask for Nathan 502-222-5859)

Rover Radio issues or IPOD Adapters http://home.valornet.com/splacket/index.htm

EAS fault http://www.rswsolutions.com

When working with GEMS vehicles. Never try to locate a misfire by pulling plug leads off - pull the injector connector instead. Otherwise you can blow up the ECU.

Secondly never swap ECUs between vehicles to test them, because both vehicles and ECUs may stop working, and you'll have to have them all reset by a franchised LR dealer (ouch!).
Joey is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:15 AM.


Sponsor Ads

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

Garage vBulletin Plugins by Drive Thru Online, Inc.