The sliding roof (glass panel) on my RR -96, was given a too large downpressure in a car wash some time back, and never got back in place. I thought some guide had jumped out of track, but:
Having dismanteled everything, I find that some plastic slides in the guide assembly are broken. Have tried locktite two-component glue with no result. This is probably not gluable?
Desperate for advice.
Also, is it possible to purchase replacements anywhere?
When working with GEMS vehicles. Never try to locate a misfire by pulling plug leads off - pull the injector connector instead. Otherwise you can blow up the ECU.
Secondly never swap ECUs between vehicles to test them, because both vehicles and ECUs may stop working, and you'll have to have them all reset by a franchised LR dealer (ouch!).
RR P38 1996 sliding roof
Redneck Rover
Redneck Rover
Linear Mode
